This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Crest-to-Crest Wave Springs are pre-stacked in series, decreasing the spring rate proportionally to the number of turns. Uses are typically applications requiring low-medium spring rates and large deflections with low-medium forces.
Standard PartsSmalley offers 4 different...
Crest-to-Crest Wave Springs are pre-stacked in series, decreasing the spring rate proportionally to the number of turns. Uses are typically applications requiring low-medium spring rates and large deflections with low-medium forces.
Standard Parts
Smalley offers 4 different series from stock, with over 4,000 springs to select from:
C Series - Inch series available from .188" to 2" in carbon and stainless steel
CS Series - Inch shim end series available from .312" to 2" in carbon and stainless steel
CM Series - Metric series available from 5 mm to 60 mm in carbon and stainless steel
CMS Series - Metric shim end series available from 8 mm to 60 mm in carbon and stainless steel
Crest-to-Crest with Shim Ends
Crest-to-Crest Wave Springs are also available with squared-shim ends. Shim ends provide a 360° contact surface when compared to the wave point contact of plain ends. The shim-ends under load, more evenly distribute the springs force upon adjacent components.
Standard Parts
Smalley offers 2 series of shim end Crest-to-Crest Wave Springs from stock:
CS Series - Inch shim end series available from .312" to 2" in carbon and stainless steel
CMS Series - Metric shim end series available from 8 mm to 60 mm in carbon and stainless steel
.png)
