New draw-wire sensor with 8 times longer service life
draw-wire sensors based on a conventional potentiometer, the new wireSENSOR
WPS-MK88 U45R with a non-contact potentiometer achieves 8 times more working
cycles, which extends the sensor’s service life to its maximum. This new
technology combined with a robust plastic housing and a favorable
price/performance ratio, sets new standards in terms of economic efficiency.
Due to innovative technology, the
new, miniature wireSENSOR WPS-MK88 U45R offers maximum service life with
approx. 2 million cycles. The sensor measures displacement and position of
components and machine parts. Small design and low acquisition costs make the
wireSENSOR WPS-MK88 U45R suitable for OEM applications and customer-optimized
series designs. This modern draw-wire sensor offers an unrivalled combination
of price and performance, robustness, compact design and service life.
The wireSENSOR WPS-MK88 U45R has replaced the conventional, analog hybrid potentiometer with a non-contact potentiometer. With common potentiometers, a sliding contact (wiper) moves along a resistive element. Consequently, the wiper quickly wears. However, the new, non-contact potentiometer i...
The wireSENSOR WPS-MK88 U45R has replaced the conventional, analog
hybrid potentiometer with a non-contact potentiometer. With common
potentiometers, a sliding contact (wiper) moves along a resistive element.
Consequently, the wiper quickly wears. However, the new, non-contact
potentiometer is based on magnetic field sensors that significantly increase
its service life. The service life of draw-wire sensors increases by a factor
of 8 compared to sensors with conventional potentiometers. To date, only encoders
could extend the service life but these are much more expensive.
These sensors are used in sectors where high cycle rates are required, e.g. in logistics and for forklift trucks. When lowering the load, normally large safety margins have to be observed, so that when rounding a corner or braking and accelerating, the truck is not put into a dangerous tilted position. If the lift height of the load can be measured, the optimum driving speed can be determined from this. In addition, the system is protected against erroneous operation, i.e. the operator cannot knowingly or unintentionally cause critical driving conditions.
Another field of application is machine tools where material must be provided in high cycle rates. In CNC milling machines, a raw part is moved for further processing to a defined position that is measured by the draw-wire sensor. If the draw-wire sensor operates 4 cycles per minute, this adds up to 240 cycles per hour, 1920 cycles per working day and 384,000 cycles per year. With a conventional potentiometer, the draw-wire sensor would already have been worn after eight months. However, the new draw-wire sensor from Micro-Epsilon operates reliably for more than five years due to a non-contact potentiometer.
Published by Micro-Epsilon USA on Mar 26, 2018
Capacitive Displacement Sensors Shine in Industrial Applications
In the field of non-contact displacement, distance and position measurement, few alternatives can match the accuracy and stability of capacitive sensors. These sensing devices provide precise results in applications ranging from simple proximity detection to dimensional tolerance inspections in locations ranging from the laboratory to the factory floor...
How measurement sensors improve the performance of tooling machines
Faster, more precise, higher productivity - these are the key requirements when developing new machine tools. In many cases, improvements can only be achieved using sophisticated sensor technologies. Micro-Epsilon demonstrates this with a wide range of applications that are ideally suited to the machine tool industry.
A Comparison of Blue and Red Laser Triangulation Sensors
Red laser sensors have been in use for over 20 years now and are known to perform well and have improved in recent years to provide good measurement stability on a wide range of dynamically changing surfaces, including low reflectivity and matt surfaces, as well as on fast-moving objects. However, on certain materials, red laser sensors perform less well. So when is it best to use a blue laser triangulation sensor over a red one? To answer this, a number of factors need to be considered.
Learn Why Eddy-Current Sensors Are Now Replacing Inductive Sensors and Switches
Both eddy-current sensors as well as inductive switches and displacement sensors have been used for many years, each having their respective advantages when it comes to measuring position and displacement of objects in harsh environments. However, recent advances in eddy-current sensor design, integration and packaging, as well as overall cost reduction, have made these sensors a much more attractive option. This is especially true where high linearity, high-speed measurements and high resolution are critical requirements.
How to Reach Unrivaled Precision in Distance and Thickness Measurements with Confocal Sensors
Confocal chromatic measuring systems are increasingly used for fast distance and thickness measurements. Different sensor and controller models open versatile fields of application, e.g. in the semiconductor industry, glass industry, medical engineering and plastics production. The unique optical confocalDT measurement system from Micro-Epsilon is based on the optical measuring principle, which specifically takes advantage of the so-called chromatic aberration of light. This refers to the different refraction of light in relation to its wavelengths. It measures distances by means of wavelength (spectrometry).
Non-contact temperature measurement of plastics
In plastics processing where thermal processes play a particularly important role, temperature is the crucial measurement parameter. Only precise temperature control ensures high, consistent product quality. Micro-Epsilon provides suitable measurement technology from a single source for almost any material or polymer.
Learn how capacitive sensors open up new perspectives
Conventional capacitive sensors are known from simple tasks e.g. as proximity sensor or for fill level measurements. With corresponding design and evaluation electronics, these sensors can also be used for high precision displacement and position measurements, achieving resolutions well below one nanometer. Capacitive displacement sensors are typically used in applications where fast displacement changes have to be acquired, where no forces can be exerted on the measurement object, where highly sensitive surfaces do not allow any contact, or where a long service life of the sensor is required. Capacitive displacement sensors from Micro-Epsilon have proven themselves in various industries and measurement tasks.
Intelligent pyrometer for automatic hotspot detection
The intelligent thermoMETER TIM 8 pyrometer offers automatic hot and cold spot detection in industrial applications which enables effective and reliable temperature control. Designed for standalone operation without a PC, it combines the advantages...Dec 19, 2019
Laser scanner offers new performance level for series applications
Precision, versatility and a compact design are often decisive characteristics in industrial series applications. The new scanCONTROL 2500 laser profile scanners from Micro-Epsilon are specially designed to meet these high requirements while being ...Dec 19, 2019
Monitoring the clamping position in machine tools
Monitoring the clamping position in machine tools is an extremely important and critical measurement task. In order to avoid incorrect machining and the high resulting costs, the position of the tool must be detected. Here, the induSENSOR LVP displ...Dec 03, 2018
Measuring the bearing gap in wind turbines
In wind turbines, the bearing gap is very important because the better the sliding properties, the higher the plant effectiveness and service life. The bearing gap between the bearing surface and the drive shaft is reliably monitored using inductiv...Dec 03, 2018
High precision gap monitoring in plant and machinery
With the eddyNCDT 3060, Micro-Epsilon has developed a powerful displacement measuring system based on the eddy current principle, which combines precision, speed and temperature stability in a unique way. These characteristics are complemented with...Dec 03, 2018
Capacitive measuring system for industrial applications
The capaNCDT 61x0/IP capacitive displacement measuring system is suitable for inline quality assurance of production processes, and for control of plant and machinery. Protected to IP68, this measuring system is therefore suitable for many industri...Dec 03, 2018
High-performance inductive displacement measuring system
The eddyNCDT 3060 inductive measurement system is based on eddy currents and enables fast, precise displacement measurements in industrial environments. More than 400 sensor models can be combined with the eddyNCDT 3060. Based on ease of use and sm...Jul 25, 2018
Laser sensors for high precision distance measurements on metals and rough surfaces
The new optoNCDT 1750LL laser sensor is used in high precision distance measurements of metallic and structured surfaces. Their oval-shaped light spot makes it possible to compensate for physical interferences and to output stable measurement values...Jul 25, 2018
New draw-wire sensor with 8 times longer service life
Compared to draw-wire sensors based on a conventional potentiometer, the new wireSENSOR WPS-MK88 U45R with a non-contact potentiometer achieves 8 times more working cycles, which extends the sensor’s service life to its maximum. This new technology...Mar 26, 2018
Microscope lens for temperature monitoring of ultra-small targets
Thermal imager monitoring of ultra-small components is now possible using a microscope lens from Micro-Epsilon. This lens is available as an upgrade for the TIM 450 and TIM 640 high resolution thermal imaging cameras, enabling thermographic macro shoot...Mar 21, 2018
The new generation of confocal chromatic measuring systems
Measuring tasks in the glass industry are often a huge challenge for sensors. The new confocal chromatic confocalDT 2421 / 2422 controllers ensure reliable, high speed and high precision distance and thickness measurements on reflecting and transpar...Mar 21, 2018
High-Tech Solution for the Inspection of Mat and Shiny Surfaces
The reflectCONTROL Automotive and surfaceCONTROL Robotic inspection systems provide easy, fast and reliable quality inspection of surfaces. From a complete chassis to a single painted part, smallest defects can be reliably recognized inline, enabling 1...Jul 24, 2017