Award Nominated, Delay Cure Adhesive to be featured at MD&M WEST, Anaheim
EpoxySet Inc. will be showcasing the FLASHBOND™ UV-5608DC, delay cure epoxy at MD&M West scheduled February 11-13, 2019 in the Anaheim Convention Center in Booth 645.
FLASHBOND UV-5608DC allows for fast processing and fixturing of parts even if both parts are opaque. The FLASHBOND™ UV-5608DC is a one part epoxy that can be activated by UV or blue light from 365nm to 405nm lig...
FLASHBOND UV-5608DC allows for fast processing and fixturing of parts even if both parts are opaque.
The FLASHBOND™ UV-5608DC is a one part epoxy that can be activated by UV or blue light from 365nm to 405nm light with an intensity of about 150mW/cm2 for 5-10 seconds. Parts are then mated together and aligned within 45-60 seconds of activation. The adhesive will yield green strength after 30 minutes for handling. Full cure will occur over the next 16 hours at room temperature.
This ground-breaking, light activated adhesive was nominated for product of the year!!
FLASHBOND™ UV-5608DC requires no mixing thus reducing processing time and errors. It will bond to metals, ceramic, glass, ABS, Polycarbonate, Ultem and other engineered plastics. This medium viscosity epoxy produces a high strength bond with low cure shrinkage and a glass transition temperature of over 80°C. It can withstand temperature cycling from of -40°C to 120°C. The cured product exhibits excellent thermal, water and chemical resistance.
EpoxySet is an innovative supplier of Epoxies, Urethanes, Silicones, Thermal Greases and UV cure technologies. EpoxySet has been providing high performance, advanced polymers to medical and electronic device manufacturers since 1997, providing consistent quality products with superior technical support to meet the most demanding applications. Vast experience in creating custom formulations allows unique solutions quickly.
Published by EpoxySet on Nov 20, 2019