Tool Setter for Length and Diameter Measurement［TD1］
[ Features ] φ20, large contact capable of detection various tools 10µm adjusted parallelism for easier installation 70% size compared to conventional products Tool setter can be used to detect wear and breakage and correct thermal distortion as well as...
[ Features ]
- φ20, large contact capable of detection various tools
- 10µm adjusted parallelism for easier installation
- 70% size compared to conventional products
By using tool setters, it is possible to achieve higher machining accuracy and productivity.
TD1 is especially suited for length & diameter measurement.
With φ20 large diameter, it is adaptable to various tools including drills, endmills and cutters.
For easy installation, the parallelism is already adjusted 10µm beforehand. Adjusting parallelism is no longer necessary.
Also, its compact size realizes an installation in a narrow space.
[ Applications ]
- Tool diameter measuring
- Tool length measuring
- Tool length preset
- Thermal distortion correction
Detected the deviation of the X-Y axes of the machining table with 0.5μm repeatability
An automobile components manufacturer that produces engine parts for a major automaker. A representative of the production engineering department consulted us on "positioning" of the machining table of the tapping center.
For more information send an inquiry directly to METROL CO.,LTD.
T: 81 50 5558 7366
F: 81 42 528 1442
1-100 Takamatsu-cho Tachikawa