The Best Things Come in Small Packages
US Digital Introduces New Addition to Miniature Optical Encoder Portfolio at ATX West 2017
US Digital, a US manufacturer of quality motion control since 1980, today announced the introduction of the E8T miniature optical encoder. Combining small form factor and resolutions up to 720 CPR, the E8T is ideally suited for medical and other space sensitive applications that require reliable position and velocity feedback. The E8T’s small package footprint fits motors as small as National Electrical Manufacturers Association (NEMA) size 11 with more than 40% reduction in package height compared to other commercially available solutions.
Utilizing US Digital’s proprietary OPTO-ASIC technology, the newly announced E8T supports up to 2,880 pulses per revolution with excellent repeatability. The E8T is available in over 3,240 different configurations and features either single-ended or differential signal output...
Utilizing US Digital’s proprietary OPTO-ASIC technology, the newly announced E8T supports up to 2,880 pulses per revolution with excellent repeatability. The E8T is available in over 3,240 different configurations and features either single-ended or differential signal outputs. Moreover, the E8T features a simple and secure, push-on hub disk design and a high-retention connector for quick, easy and reliable installation that keeps assembly cost and complexity to a minimum.
- 9 resolutions up to 720 CPR
- 3,240 configurations available, including single and differential output
- Compact, low profile form factor
- 1.120 inch (in) / 28.45 millimeter (mm) package outside diameter
- 0.460 in / 11.68 mm package height
- Fits NEMA 11, 14 and 17 motors
- Simple and efficient assembly process
- Four-piece construction
- Push-on hub disk design, patent pending
- High retention connector
- 100 kilohertz frequency response
- Functional replacement for US Digital’s E7P and E8P
“Whether its portable technology or diagnostic equipment destined for the laboratory floor, today’s medical applications face increasing pressure to become smaller and lighter without compromising functionality,” said Donna Peterson, Vice President of Marketing and Sales at US Digital. “The E8T’s small, low profile package and available resolutions make it uniquely positioned to help address these requirements while delivering excellent value and reliability relative to alternative motion control solutions.”
Availability Sample and production quantities of E8T are now available. To learn more about the E8T product line, or for complete technical specifications, including mechanical drawings, visit http://www.usdigital.com/E8T.
About With over a million off-the-shelf configurations, plus any number of custom product offerings, US Digital has delivered quality in motion since 1980. Located in Vancouver, Washington, the vertically integrated facility and the stellar service team provide customers with lead times significantly shorter than the competition, offering same-day fulfillment on most orders. Please contact US Digital for more information at 1.800.736.0194 email@example.com.
Published by US Digital Corporation on 10 Feb 2017
For more information send an inquiry directly to US Digital Corporation
Encoder Basics for Motion Control Engineers
Selecting the right encoder for a unique application can be a daunting task for the design engineer. This whitepaper covers commonly asked questions when considering encoders for motion control applications. From basics such as mechanical configuration and absolute versus incremental to the differences in accuracy and resolution, "Encoder Basics for Motion Control Engineers" will shed some light on the encoder selection process.
US Digital Product Shaft and Bore Tolerances
US Digital produces hubs and shafts with tolerances based on the ANSI B4.1-1967 (R2009) standards, specifically the LC5 (Locational Clearance) fit class, and recommends that customers conform to the same tolerances for best fit and performance when using US Digital encoders. Visit this link for more information.
US Digital Introduces New High Resolution E4T Optical Encoder with 400 and 500 CPR
US Digital, a US manufacturer of quality motion control since 1980, today announced the addition of 400 and 500 cycles per revolution (CPR) resolutions to its existing E4T line of miniature optical encoders. Specifically designed for robotics, medi...8 Dec 2016