State of the PM Industry in North America—2016
The North American powder metallurgy (PM) industry gathered in early June for POWDERMET2016 Boston. The Opening General Session began with an address from Metal Powder Industries Federation President Patrick McGeehan to present the annual State of the PM Industry in North America.
The entrepreneurial spirit still rings true in the powder metallurgy (PM) industry, and confidence remains strong within executive offices and on the shop floors in the majority of PM industry companies. Following a healthy 2015, the year opened on a positive trend with modest growth forecast by ...
The entrepreneurial spirit still rings true in the powder metallurgy (PM) industry, and confidence remains strong within executive offices and on the shop floors in the majority of PM industry companies. Following a healthy 2015, the year opened on a positive trend with modest growth forecast by most informed observers. Conventional press-and-sinter companies and metal powder producers report good business levels, as well as companies involved with metal injection molding (MIM), metal additive manufacturing (MAM), and hot isostatic pressing (HIP). The demand for refractory metals, however, has continued to decline.
Metal Powder Shipments
2015 wrapped up another modest-growth year for metal powder shipments. Total North American iron powder shipments increased by 1.73% to 384,173 mt (423,565 short tons (st)), with the PM sector reflecting 91% and growing by 2.3% to 349,702 mt (385,559 st). Other sectors representing welding, cutting, scarfing, and lancing dropped off substantially.
Stainless steel powder shipments increased by an estimated 2.5% to 7,347 mt (8,100 st). Copper powder shipments increased at the same amount to an estimated 16,272 mt (17,940 st). Aluminum remained about even with the previous year at 36,280 mt (40,000 st). Other powder shipment estimates were: nickel 5,551 mt (6,120 st); molybdenum 1,760 mt (1,940 st); tungsten 2,630 mt (2,900 st); and tungsten carbide 4,263 mt (4,700 st). Total estimated metal powder shipments in 2015 increased by 1.2% to 458,275 mt (505,265 st).
Developing metal powders for metal additive manufacturing via gas atomization is a new trend set for acceleration by most leading powder makers. Meanwhile, MAM's successful use in the aerospace and medical sectors continue to pave the way for future applications. Although the MAM market currently remains small and limited to about 15 commercially available materials, it offers exciting promise for PM in the years ahead.
Another trend is the growing need for precision machining of PM parts. Powder suppliers are introducing high-performance lubricants and additives for the press-and-sinter PM market. The aluminum powder market for PM parts applications is undergoing a new surge as automotive designers seek lighter weight parts. The use of higher-strength aluminum alloys with metal matrix composites (MMCs) is showing renewed interest to reduce mass and provide improved properties, and this focus is currently a project within the Lightweight Innovations for Tomorrow (LIFT) consortium. This industry-led, government-funded consortium is investigating the development of a cost-effective process for sub-micron reinforced aluminum MMCs. As a member of LIFT, MPIF is supportive of this initiative......
For a full report including topics on:
PM Equipment Market Trends
Published by Metal Powder Industries Federation on 21 Jun 2016
105 College Rd. E
Registration Opens for Sintering Seminar
Registration has opened for one of the powder metallurgy (PM) industry's most popular programs, the Sintering Seminar. Only held every two years, this two-day seminar is meant for industry professionals either new to sintering or with intermediate...18 Jul 2016
Metal Injection Molding Conference Call for Presentations
An official call for presentations has been announced for MIM2017: International Conference on Injection Molding of Metals, Ceramics and Carbides, February 27–March 1, 2017. This global conference and tabletop exhibition will take place in Orlando, Flo...1 Jul 2016
Award-Winning Metal Powder Parts
The winners in the 2016 Powder Metallurgy (PM) Design Excellence Awards competition, sponsored by the Metal Powder Industries Federation (MPIF), amply demonstrate PM's capabilities in their own ways. They focus on PM's strong points to gain and extend ...21 Jun 2016
New MPIF Standard 35 Released- Metal Injection Molded Parts 2016 Edition
This standard provides the design and materials engineer with the latest engineering property data and information available in order to specify materials for components made by the MIM process. Ensure that your quality assurance/laboratory staff and y...23 May 2016
Metal Powder Organizations Unveil New Websites
The Metal Powder Industries Federation, APMI International, and the Center for Powder Metallurgy Technology have all launched new websites. If you want to learn more about powder metallurgy or advance your education in the industry, visit apmiinternati...17 Mar 2016