SPIROL Introduces Oval Compression Limiters
SPIROL introduces compression limiters
Danielson, CT, USA — SPIROL introduces the Series CL400 Press-In and Series CL460 Molded-In Oval Compression
Limiters. Both accommodate up to 2.25mm extra clearance on one
axis, providing additional flexibility over round Compression Limiters for
centerline and stack-up tolerancing.
Produced from high carbon steel, the oval Series CL400 accommodates up to 2.25mm extra clearance on one axis, providing additional flexibility over round Compression Limiters for centerline and stack-up tolerancing. Similar to the CL200 and CL350, this split-seam oval Limiter is roll-formed...
Produced from high carbon steel, the oval Series CL400 accommodates up to 2.25mm extra clearance on one axis, providing additional flexibility over round Compression Limiters for centerline and stack-up tolerancing. Similar to the CL200 and CL350, this split-seam oval Limiter is roll-formed, and it is spring tension that provides positive retention in the hole. The roll-forming manufacturing method yields substantial cost savings over machined products with similar features and characteristics. The CL400 is rated for use up to ISO Class 8.8 bolts.
The CL460 Series is similar to the oval Series CL400, but produced with a butted-seam so as to prevent plastic from entering the inner diameter during the molding process. This series also accommodates up to 2.25mm extra clearance on one axis. The CL460 is rated for use up to ISO Class 8.8 bolts.
Download their new data sheet on these new Oval Compression Limiters.
Contact the Sales department at any one of SPIROL’s global locations.
# # #
SPIROL INTERNATIONAL CORPORATION is a leading manufacturer of a diverse line of engineered components for fastening and joining, including Coiled Spring Pins, Slotted Spring Pins, Solid Pins, Disc Springs, Alignment Dowels and Bushings, Spacers, Compression Limiters, Threaded Inserts for Plastics, Precision Shims, Pin and Insert Installation equipment. SPIROL can be found on 4 continents within the following 12 countries: Brazil, Canada, China, Czech Republic, England, France, Germany, Mexico, Poland, South Korea, Spain, and the United States. Since 1948, SPIROL has been providing technical expertise in fastening, joining and assembly to the world's leading manufacturers.
Published by SPIROL International Corporation on 24 Mar 2016
For more information send an inquiry directly to SPIROL International Corporation
Coiled Spring Pins Offer a Unique Balance of Strength and Flexibility
Is stronger always better? This White Paper directly compares Coiled Spring Pins to Solid Pins and details why having a balance between strength and flexibility will prolong the useful life of an assembly. Download your free White Paper today!
How to Maintain Joint Integrity When Converting from Metal to Plastic
The weakest sections of many plastic part designs are the joints and assembly points. During screw assembly of mating components, the screw has to be tightened with sufficient torque to produce the recommended axial tension load between the host component and the threads of the screw in order to prevent loosening. A common problem with bolted joints is that plastics are susceptible to creep or stress relaxation. Under loads well below the elastic limit, plastics will lose their ability to maintain a load. When this occurs, the threaded connection becomes loose.
SPIROL Brazil Receives 2015 ALBÉA Supplier of the Year Award
SPIROL Brazil is pleased to announce the receipt of ALBÉA's Supplier of the Year Award for 2015. SPIROL was ranked with the best performance among more than 80 suppliers in the combined metrics for quality, logistics, commercial and engineering.23 Jan 2017