Product Focus

EP76MHT, EP21TPLV, X5TC, MasterSil 713 and more

 

X5TC: One Part, Thermally Conductive Elastomeric System Elastomeric adhesive system, X5TC delivers thermal conductivity o...

+ Read more

X5TC: One Part, Thermally Conductive Elastomeric System
Product Focus Elastomeric adhesive system, X5TC delivers thermal conductivity of 10-12 BTU•in/ft2•hr•°F [1.44-1.73 W/m•K] while maintaining excellent electrical insulation properties. It is well suited for bonding dissimilar substrates and performs well when subjected to thermal cycling, vibration, shock and related forces. This system offers solid tensile lap shear and T-peel strength. X5TC has a paste-like consistency and cures at room temperature or more quickly with the addition of heat.
For more information, request a technical data sheet on X5TC


EP76MHT: Nickel Filled Epoxy Withstands Temperatures up to +400°F
Two component EP76MHT is an adhesive, sealant and coating that features impressive electrical conductivity with a volume resistivity of 5-10 ohm-cm. This easy to handle system is formulated to cure at room temperature or more rapidly at elevated temperatures. When fully cured, EP76MHT, has a lap shear strength of over 2,100 psi. It has superior dimensional stability and low shrinkage upon cure. This epoxy also offers excellent thermal conductivity of 8-9 BTU•in/ft2•hr•°F [1.15-1.30 W/m•K].
For more information, request a data sheet on EP76MHT


EP21TPLV: Compound with Excellent Resistance to Chemicals
Featuring a unique blend of outstanding toughness and chemical resistance, EP21TPLV can withstand exposure to water, gasoline, oils, hydrocarbons, fuels, hydraulic fluids and many acids and bases. Often used as a sealant, it is also very effective as an adhesive, coating and encapsulant. This two part epoxy polysulfide is easy to handle with a convenient, one to one mix ratio by weight or volume. Shore D hardness is 60-65.

For more information, request a data sheet on EP21TPLV



MasterSil 713: Low Viscosity, One Component Fast Curing Silicone
Ideal for smaller encapsulations and conformal coating applications, MasterSil 713 is an easy to use one component silicone with an exceptionally low viscosity. This self leveling system cures rapidly at room temperature and is non-corrosive. Speed of cure depends upon the level of humidity and the thickness of the layer being cured. It can be cured in thicknesses up to ¼ inch deep with superb flexibility and elasticity. MasterSil 713 also offers outstanding electrical insulation properties and is serviceable up to +400°F [+204°C].
For more information, request a data sheet on MasterSil 713



EP42-2LV: Low Viscosity Epoxy Features Outstanding Chemical Resistance
Master Bond EP42-2LV is a two component epoxy adhesive, sealant, coating and casting compound featuring outstanding chemical resistance and electrical insulation properties. It is castable to thicknesses exceeding 2-3 inches and is serviceable from -60°F to +300°F [-51°C to +149°C]. The low viscosity of EP42-2LV enables it to be particularly desirable for potting and encapsulations as well as coatings. This epoxy system is ideal for aerospace, electronic, electrical, fiber-optic and optical applications.

For more information, request a data sheet on EP42-2LV



EP3HTMed: Chemically Resistant Polymer Adhesive Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does not contain any diluents or solvents. Another benefit of this single component, no mix epoxy adhesive is its unlimited working life and its thixotropic paste viscosity.

For more information, request a data sheet on EP3HTMed

- Read less

More information

For more information send an inquiry directly to Master Bond






 

Master Bond

www.masterbond.com
E: main@masterbond.com
T: 201-343-8983
F: 201-343-2132

Address
154 Hobart Street
Hackensack, NJ
07601
United States
View map

Follow  
Facebook   Twitter   LinkedIn   YouTube   Google+   Pinterest
 
 

Master Bond

www.masterbond.com
E: main@masterbond.com
T: 201-343-8983
F: 201-343-2132

Address
154 Hobart Street
Hackensack, NJ
07601
United States
View map

Follow  
Facebook   Twitter   LinkedIn   YouTube   Google+   Pinterest
 
 
 
 
 
 
 
Close
CONTACT MASTER BOND
* sorry this is a required field