5-Axis Servo/Stepper Controller Supports IEC 61131-3 Programming


5-Axis Servo/Stepper Controller Supports IEC 61131-3 Programming

The MC405 is a high specification Motion Coordinator using a high performance ARM11 processor, with five flexible axis ports and four Voltage outputs. This Ethernet-based controller can run 4 analog servo axes with an additional master encoder follower input. Additionally, you can run 5...

+ Read more

The MC405 is a high specification Motion Coordinator using a high performance ARM11 processor, with five flexible axis ports and four Voltage outputs.

This Ethernet-based controller can run 4 analog servo axes with an additional master encoder follower input. Additionally, you can run 5 open-loop stepper axes with its Step/Direction signal outputs. Support for absolute encoders such as SSI and EnDAT is a standard feature. A rich high-level multi-tasking programming environment makes quick work out of complex motion. The MC405 has (8) 24V isolated inputs and (8) bi-directional 24V points. A CAN port is standard on all Trio controllers for I/O expansion, or CANopen to other devices. Dual serial ports can be user programmed for sending or receiving data with external devices. All MC4xx controllers also support IEC 61131-3 programming and the UNIPLAY HMI system.

- Read less

 
More information
 

Trio Motion Technology

www.triomotion.com
E: usasalesteam@triomotion.com
T: 724-472-4100
F: 724-472-4101

Address
187 Northpointe Blvd.
Suite 105
Freeport, PA
16229
United States
View map

Follow  
Twitter   LinkedIn   YouTube
 
 
 
 
 

For more information send an inquiry directly to Trio Motion Technology






 

Trio Motion Technology

www.triomotion.com
E: usasalesteam@triomotion.com
T: 724-472-4100
F: 724-472-4101

Address
187 Northpointe Blvd.
Suite 105
Freeport, PA
16229
United States
View map

Follow  
Twitter   LinkedIn   YouTube
 
 
Close
CONTACT TRIO MOTION TECHNOLOGY
* sorry this is a required field